Create steam rooms in the bathrooms
Instructions
1
Spread thick and clean towels on your bathroom floor. Thick towels cover vents or cracks in the ground to prevent the steam from the bathroom.
2
Close the door of the bathroom and run thick of the Ribbon around the door where it meets the frame. This covers the slot where steam can escape but still marks it easy to open the door. Repeat this step with all the other doors in the bathroom.
3
Wrap a thick towel and place it against the bottom of the door, once again, to prevent the steam from escaping.
4
Fill your steam humidifier and turn it on according to the instructions accompanying the product. The humidifier additional offering of warm moisture in the bathroom.
5
Close your bathtub drain and your faucet tub or shower on the highest heat setting. The water must be very hot to create a large amount of steam. If you have only a shower, put a washcloth on the drain before you turn the tap. Pull the shower curtain in place so that it encompasses the shower.
6
Open your hot bathroom sink faucet and let it run. Do not connect the drain of the sink so that the sink overflows. Repeat this procedure with each sink in the bathroom.
7
Let it steam accumulates in the Chamber. Turn off water in the bath or shower when you have enough steam. Turn off your sink faucet when the water begins to run cold.
Create,steam,rooms,in,the,bathrooms
0 comments:
Post a Comment