Sew a breach in a bra

Sew a breach in a bra

Instructions

Small hole
1
Take a moment to examine your bra for smaller holes. If the holes are particularly small, use a piece of chalk to mark the holes for find them you easily.

2
Choose a cotton thread whose color matches your bra. Cut an arm length if you have several holes and about half of this is you have a hole. Thread the needle and tie the two ends together so that you have a complete loop of the chain.

3
At the back of the BRA, pinch together the small hole. Sew long on the hole until it is completely landlocked.

4
Stretch the BRA to make sure that the hole is mended safely. Pull the needle under your last stitch, tie the string and cut the thread with scissors. If you have several holes, repeat this process until all the holes are mended.

Big hole
5
Take your bra torn in a fabric store and choose a patch or a small amount of fabric and a similar color as your bra. Or, you could get creative and add a touch of another color or design of your bra.

6
Place the BRA on the patch or the fabric on a flat surface. Use chalk to describe more great all around the hole about 2 cm.

7
Use an iron to fold and press the edges of the patch or fabric at the back to keep the raw edges of your skin.

8
Cut an arm length of cotton thread in a color that matches your bra. Thread the needle and tie the two ends together, so you have a loop completes the chain.

9
Use the stitches to sew all around the patch. Once you've made your way around, stretch the BRA to make sure that the patch is firmly in place. Pull the needle under your last stitch, tie the string and cut the thread with scissors.

Bra fittings
10
Feel the frames, to ensure that it is not broken. If this is the case, buy new frame at a craft store. If the frame is not broken, push it down into the BRA.

11
Cut about three quarters of the arms of thread padding which is a similar color as your bra. Thread the needle and tie the two ends together, so you have a loop completes the chain.

12
Weave the thread firmly on top of the hole, covering approximately 2 cm before and after the hole along the seam and frames. Tie a double knot with the wire and the snip.
Sew,a,breach,in,a,bra

Categories: Clothing Care