Cut shreds in pants

Cut shreds in pants

Instructions

1
Put on the jeans that you go to grind. Slightly bend the knees, so they grow into the fabric and you can identify where they are in jeans. Use the fabric marker to make a small dot in the center of each ball. Remove the jeans and place them on a surface flat.

2
Cut two pieces of cardboard from the box that are a bit narrower than the width of each pant leg. Make sure that the length of the pieces are at least 5 inches.

3
Drag a piece of cardboard on each pant leg so that the seams are on the sides of the carton. Make sure that the front of the jeans is upwards. Align the carton is part of the jeans you want to grind. Use the point at the level of the knee to assess where the flap should be in relation to the knee.

4
Cut jeans by using the cutting box of straight lines of different lengths. Do not cut the seams inside or outside of the pant legs or jeans will rip more and disintegrates easily.

5
Make cuts as much as you want, by focusing on the knees and thighs for the straight leg jeans and focusing on the entire length of skinny jeans. Return the Jean and make cuts in the back as well, if you want to deconstruct the front and rear of the jeans.

6
Pull the jeans tight on the carton on the site of the cuts. Change of sandpaper on the cuts, moving slowly from one side to the other. This, until what cuts have frayed.
Cut,shreds,in,pants

Categories: Clothing Care