Line a Kimono

Line a Kimono

Instructions

1
Sewing body lining. Place the back and front panels together. Sew them to the level of the shoulders. Stitch the sides except where the arms will insert. Stop about 12 inches down short so that the lining without the bottom of the garment. Use a 1/2 in. seam sewing not where the collar will be fixed.

2
Sew lining sleeves. Match panels front and rear. Sew them on three sides: up, down and the edge where the hands will emerge. Attach the sleeves to the body where you left an opening. You will need to hand - sew here because you need to attach the front of each channel separately from the rear in order to leave armholes.

3
Put your shell lining inside. Put your kimono backwards Cap. Place the outer shell inside the shell of the lining. Working the fabric until all edges are aligned. Sew the lining on the outer shell in the shoulders and seams except the hem line and the edges of the bottom of the sleeves. Not sewing the lining on the kimono collar.

4
Put the whole garment, with lining, upside down. You have attached the liner for the kimono. You can now attach the collar. Attach the collar folding the liner and kimono fabric down to the opening of the pass. Fold a section of ½ of the matter of collar and pinning in lining and kimono fabrics folded down. Sew along the seam. Lower the collar. It will now be pasted inside the kimono and ensure both kimono fabric and lining. Iron the collar to make it sit flat.
Line,a,Kimono

Categories: Clothing Care