DIY Christmas boot

DIY Christmas boot

DIY Christmas boot

Perhaps nothing is more discouraging to achieve confidence in your closet for your favorite pair of boots to find fragile shoes and lengths of leather calf-size idleness against one another as if they take a NAP. Well, wake up, boots! It is time to get standing at right. These inserts easy to assemble boot will keep your own cold shoes and tidy in your closet so that your boots are always ready when you are.

You will need
To make these inserts of startup, you will need cotton fabric 1/2 yard, wadding, needle sewing, wire, glass beads, wire, scissors and a pom pom maker (or 4 "diameter half circle cut in stiff cardboard").

DIY Christmas boot

Trim fabric width
Fold the fabric in half lengthwise 4 1/2 inches. Cut along the edge until you cut a piece of fabric that is 4 1/2 "folded x 36" long. Open it would measure 9 "x 36".

DIY Christmas boot

Cut in half to make two
Fold this piece lined fabric in half and cut along the length. Now, there are two folded pieces of fabric. Open they measure 9 "x 18". If your boots are taller or shorter, adjust the length of therefore, leaving a few extra inches for seam allowances.

DIY Christmas boot

Cut the end caps
The excess fabric, cut two squares that will be large enough to cover the holes in the boots. Measure the size of your specific plan.

DIY Christmas boot

Sew in
Sew a seam on the side of the tree fabric leaving a 1/2 seam allowances ", then fold the bottom." Sew a seam on the bottom, leaving a 1/2 seam allowance "it as well."

DIY Christmas boot

Increasing Bottoms
Add a handful of glass beads to weigh down the bottom of the Christmas of start.

DIY Christmas boot

Stuff the
Stuff starting with trim cotton inserts leaving an inch at the top for a seam allowance.

DIY Christmas boot

Sew the top
Fold the top edge slots, position the fabric square on the opening and sew a whip stitch around the edge of the opening. This will make a circular tray. The corners of the square will be folded inside the power tube and do not affect the final version of the upper part.

DIY Christmas boot

Attach all inserts
Cut a 1-inch fabric bracelet x 4 to fix your boot to another inserts. Sew the 2 inches high inside push, where is located the zipper button at each end. This helps keep the boots standing and together.

DIY Christmas boot

Pom Pom Toppers
To top it all, take an existing pom pom or use a pom pom maker to adorn the top of each lifter. If you do not braid or a pom pom maker, just cut equal lengths of wire and attach all together and trim to size in order to fashion a cheerleader. Sew this towards the top of your Slipper with a needle and thread.

DIY Christmas boot

DIY,Christmas,boot

Categories:

0 comments:

Post a Comment