DIY: Sunglasses Clip

DIY: Sunglasses Clip

Instructions

1
With the screwdriver, unscrew the arm of the sunglasses. Throw weapons and screws.

2
Cut a long piece of 3 inches of wire, or gently unfold a paper clip and straighten it with pliers.

3
The thread through one of the holes where the screws used to be. Leave an equal amount of thread on both sides of the hole. Wrap one end of the yarn twice around the area of the hole, secure the cable to the frame. Trim excess with wire cutters.

4
Bend the other end of the wire upwards and inwards in the form of hook. This is the part that will hook onto the arm of your glasses. Adjust if necessary. At the end of the hook, bend wire sharply on itself, so that there is no sharp point, only a small loop of wire.

5
Repeat on the other side. Try them on your glasses and adjust accordingly.

6
Paint the ends of bare wire at least two layers of transparent nail varnish to protect your glasses and face.
DIY:,Sunglasses,Clip

Categories: Clothing Care