Darn panty

Darn panty

Instructions

1
Put the pants upside down. Turn your iron on its setting the lowest.

2
Snip away any frayed or loose threads that you could accidentally cross or push it forward, compromise the integrity and the appearance of the repair.

3
Pull the hole closed as much as possible, taking care to avoid the gathers or wrinkling of the fabric.

4
Cut a piece of adhesive fabric about 1/4 inches larger than the hole on all sides. Place tape over the hole.

5
Hold the iron on the band for 3 to 5 seconds, let it melt adhesive strip and value.

6
Return the pants. Cut a piece of thread and thread your needle.

7
Tie the ends in a knot. Through the back of the fabric Strip, pushing even if the front of the hole in the needle.

8
Stitch the hole closed in a zigzag pattern, trying to keep each point as close as possible to minimize the appearance of the thread. For the knit pants, you will need to do a second set of parallel to the first stitches - forming a model of subwoofer.

9
Stretch the point at the top, stopping inside the panties. Leave a small loop in place.

10
Run the needle through the loop, then go down the repair half. Pull firmly on the wire.
Darn,panty

Categories: Clothing Care