Get across the DrawString is stuck inside the pants

Get across the DrawString is stuck inside the pants

Instructions

Hanger method
1
Pull the cord completely from the panties.

2
Cut the hook of a hanger. Bend it by hand to obtain a slight curve.

3
Make a small hook at one end of the suspension, using your needle nose pliers.

4
Slide one end of your cord through the hook. Squeeze hook just enough to secure the chain, so it won't shoot for free as you push through your belt.

5
Insert the end bent snap in one side of the belt of your pants.

6
Push well support belt, sometimes scrunching fabric to help him get by.

7
Unfold the hook with your pliers. Pull the handlebar the rest of the way through, everything now on the cord.

8
Tie a knot at each end of the cord to help prevent this from happening again.

With the help of a safety pin
9
Pull the rest of the way to sweat pants.

10
Open the safety pin. Push the needle of the rod tip into one end of the cord.

11
Close the safety pin. Insert the rod into the slide in sweat pants. Scrunch the fabric according to the needs, by grasping and pushing the rod guiding well.

12
Pull the PIN on the other end of the slide.

13
Remove the safety pin. Adjust each end of the cord length.
Get,across,the,DrawString,is,stuck,inside,the,pants

Categories: Clothing Care